On-line spectrophotometric determination of scandium after preconcentration on XAD-4 resin impregnated with nalidixic acid

An on-line scandium preconcentration and determination method was developed with spectrophotometer associated with flow injection. Scandium from aqueous sample solution of pH 4.5 was selectively retained in the minicolumn containing XAD-4 resin impregnated with nalidixic acid at a flow rate of 11.8 mL min^?1 as scandium–nalidixic acid complex. The scandium complex was desorbed from the resin by 0.1 mol L^?1 HCl at a flow rate of 3.2 mL min^?1 and mixed with arsenazo-III solution (0.05 % solution in 0.1 mol L^?1 HCl, 3.2 mL min^?1) and taken to the flow through cell of spectrophotometer where its absorbance was measured at 640 nm. The preconcentration factors obtained were 35 and 155; detection limits of 1.4 and 0.32 μg L^?1 and sample throughputs of 40 and 11 were obtained for preconcentration time of 60 and 300 s, respectively. The tolerance limits of many interfering cations like Th(IV), U (VI), rare-earths and anions like tartrate, citrate, oxalate and fluoride were improved. The method was successfully applied to the determination of scandium from mock seawater samples and good recovery was obtained. The method was also validated on certified reference material IAEA-SL-1 (lake sediment) and the result was in good agreement with the reported value.     

Regioselective Synthesis of Trichloromethyl‐Substituted Salicylates and Cyclohexenones by One‐Pot Cyclizations of 1,3‐Bis(trimethylsilyloxy)buta‐1,3‐dienes

A variety of 6‐(trichloromethyl)salicylates (=2‐hydroxy‐6‐(trichloromethyl)benzoates) were prepared by TiCl₄‐mediated cyclization of 1,3‐bis(trimethylsilyloxy)buta‐1,3‐dienes with 1,1,1‐trichloro‐4,4‐dimethoxybut‐3‐en‐2‐one. The employment of trimethylsilyl trifluoromethanesulfonate (Me₃SiOTf) as Lewis acid resulted in the formation of trichloromethyl‐substituted cyclohexenones. The cyclizations proceeded with good‐to‐very‐good regioselectivities.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

小麦秸秆发酵产生的真菌Pleurotus ostreatus IBL-02锰过氧化物酶的溶胶-凝胶固定化及其催化污水脱色(英文)

Solid state bio-processing of wheat straw was carried out through an indigenous fungal strain Pleurotus ostreatus IBL-02 under pre-optimized fermentation conditions. The maximum activity, 692±12 U/mL, of the industrially important manganese peroxidase (MnP) enzyme was recorded after five days of still culture incubation. The crude MnP was 2.1-fold purified with a specific activity of 860 U/mg after purification on a Sephadex-G-100 gel column. On native and SDS-PAGE electrophoresis gels, the purified MnP fraction was a single homogenous band of 45 kDa. An active fraction of MnP was immobilized using hydrophobic sol-gel entrapment comprising tetramethoxysilane (T) and propyltrimethoxysilane (P) at different T:P molar ratios. Characterization revealed that after 24 h incubation at varying pH and temperatures, the MnP fraction immobilized at a T:P ratio of 1:2 in the sol-gel retained 82% and 75% of its original activity at pH4 and 70 ℃, respectively. The optimally active fraction at a 1:2 T:P ratio was tested against MnSO4 as a substrate to determine the kinetic catalytic constants KM and Vmax . To explore the industrial applicability of P. ostreatus IBL-02 MnP, both the free and immobilized MnP were used for the decolorization of four different textile industrial effluents. A maximum of 100% decolorization was achieved for the different textile effluents within the shortest time period. A lower KM , higher Vmax , hyper-activation, and enhanced acidic and thermal resistance up to 70 ℃ were the novel catalytic features of the sol-gel immobilized MnP, suggesting that it may be a potential candidate for biotechnological applications particularly for textile bioremediation purposes.     

A general method for the preparation of N-heterocyclic carbene–silver(I) complexes in water

A new synthetic method leading to N-heterocyclic carbene–silver(I) complexes [(R₂-NHC)₂Ag]⁺ [AgX₂]^? is developed by using benzimidazolium compounds, NaOH (as a base), silver salts and water (as the reaction medium). Single-crystal X-ray structure revealed that compound 1 comprises a linear [Ag-(Et₂-Bimy)₂]⁺ cation and a linear [AgBr₂]^? anion. These two ions are linked through an Ag^I–Ag^I association and staggered at an angle of 90.3°.     

Production from ilmenite of TiO2-supported catalysts for selective catalytic reduction of NO with NH3

Economic production of titanium dioxide (yield >98 %) from ilmenite has been achieved by use of a modified sulfate reduction process. A series of samples were prepared by varying the concentration of titanium dioxide nuclei (0.2, 0.3, and 0.6 %) and further impregnation with antimony and vanadia. The structural and acidic properties of the samples were comprehensively studied by X-ray diffraction (XRD), transmission electron microscopy, BJH pore size distribution, and temperature-programmed desorption of NH₃. The XRD results revealed the presence of intense peaks from anatase titanium dioxide. Enhancement of surface area was observed for second-time filtered samples, possibly because of loss of iron from the bulk. As a result, formation of additional micropores was apparent from N₂ adsorption and desorption isotherms. Among all the antimony and vanadia-doped samples, the first-time filtered sample with the low concentration of nuclei (0.2 %) had the highest catalytic activity at low temperatures, owing to its larger pore size and abundant acidic species.     

Enhancement of naringenin solution concentration by solid dispersion in cellulose derivative matrices

Naringenin (Nar) is an important bioactive flavonoid with poor organic solubility and oral bioavailability. It is highly promising for treatment of conditions including diabetes, hyperlipidemia, and hepatitis C infection. Amorphous solid dispersion (ASD) of Nar is an appealing way to enhance its solubility, and carboxylated cellulose esters are attractive polymers for this purpose because of their ability to stabilize drugs against crystallization in both solid and solution phases, while restricting drug release to the pH of the small intestine (ca. 6.8). We demonstrate that ASDs of Nar can be formed using such carboxylated cellulose derivatives as cellulose acetate adipate propionate (CAAdP), carboxymethylcellulose acetate butyrate (CMCAB) and hydroxypropylmethylcellulose acetate succinate (HPMCAS). We compare Nar solution concentrations and release profiles from these cellulosic ASDs to those from pure crystalline Nar, and to Nar ASD in poly(vinylpyrrolidinone) (PVP). We show that all polymers in this study form ASDs with Nar, that the PVP ASDs release Nar at both gastric (1.2) and small intestine (6.8) pH, and that the cellulosic polymers release Nar selectively at neutral pH. Solution concentrations of Nar are significantly enhanced from these ASDs. These preliminary studies indicate that HPMCAS, CAAdP, and CMCAB are practical ASD polymers for Nar due to their ability to generate and stabilize high solution concentrations, and their pH-triggered drug release.     

Improved methods for the synthesis and isolation of imidazolium based ionic salts

Solvent-free reactions were used for the synthesis of a series of imidazolium-based ionic salts: 3,3′-[pyridine-2,6-diylbis(methylene)]bis(1-R-1H-imidazol-3-ium)chloride; (R = methyl, ethyl, butyl, isobutyl, hexyl, and benzyl). A simple and effective filtration process was used to isolate all the products in high purity and with yields ?93% within a 24 h period. The highly pure ionic compounds which are precursors to N-heterocyclic carbene ligands used in catalysis were fully characterized as gray-white hygroscopic salts.     

Enhancement in Aqueous Solubility of Mefenamic Acid using Micellar Solutions of Various Surfactants

Journal of Solution Chemistry - The development of a meaningful dissolution procedure for drug products with limited water solubility has been a challenge to both the pharmaceutical industry and...     

Independent isomeric-yield ratio of 89m,gNb from 93Nb(γ, 4n), natZr(p,xn), and 89Y(α, 4n) reactions

The independent isomeric-yield ratios of ^89m,gNb for the ⁹³Nb(γ, 4n) ^89m,gNb reaction with bremsstrahlung energies of 45-, 50-, 55-, 60-, and 70-MeV were measured by the activation and the off-line γ-ray spectrometric technique at 100 MeV electron linac of the Pohang accelerator laboratory. The isomeric-yield ratios of ^89m,gNb for the ^natZr(p, xn) ^89m,gNb and the ⁸⁹Y(α, 4n) ^89m,gNb reactions were measured by using a stacked-foil activation technique with the proton energies of 19–45 MeV and alpha energies of 38.9-, 40.5-, and 42.5-MeV at the MC-50 cyclotron of Korea Institute of Radiological and Medical Sciences. The measured isomeric-yield ratio of ^89m,gNb from the ⁹³Nb(γ, 4n), ^natZr(p, xn), and ⁸⁹Y(α, 4n) reactions were compared with the similar literature data in the ⁸⁹Y(³He, 3n) reaction. It was found that the isomeric yield ratio of ^89m,gNb increases with projectile energy, which indicate the effect of excitation energy. However, for the similar compound nucleus with the same excitation energy, the isomeric-yield ratios of ^89m,gNb in the ⁸⁹Y(α, 4n) and ⁸⁹Y(³He, 3n) reactions are higher than those in the ⁹³Nb(γ, 4n) and ^natZr(p, xn) reactions, which indicates the role of input angular momentum. The isomeric-yield ratios of ^89m,gNb in the ⁹³Nb(γ, 4n), ^natZr(p, xn), ⁸⁹Y(α, 4n), and ⁸⁹Y(³He, 3n) reactions were also calculated theoretically using computer code TALYS 1.4. The theoretical isomeric-yield ratios of ^89m,gNb from four reactions increase with excitation energy. However, the theoretical value are significantly higher than the experimental data in the ⁹³Nb(γ, 4n) and ^natZr(p, xn) reactions but slightly lower or comparable in the ⁸⁹Y(α, 4n) rand ⁸⁹Y(³He, 3n) reactions.